Top 10 common forklift crashes ， forklift procedure ought to pay attention to these matters ！.
Top 10 common forklift crashes ， forklift procedure ought to pay attention to these matters ！.
Blog Article
Do not ignore the forklift at work. If the operation is bad, there will be major accidents in minutes, and there are many accidents including forklifts.
Instance 1: The forklift freight obstructed the driver's view, and the person in front might not be discovered, resulting in a moving crash.
Instance 2: In order to maintain the equilibrium of the forklift when lifting heavy products, the employees utilized their body weight as the weight, which almost caused casualties.
Situation 3: The size of the forklift cargo exceeds the allowed size of the course and holds on the roadside shelf, which virtually causes an accident.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the employees unlawfully, the forklift vehicle driver does not put on the seat belt, the forklift lifter drops and the vehicle driver is squashed when the forklift rolls over.
Case 7: The forklift chauffeur did not wear a seat belt and fell from the vehicle when it surrendered and was squashed.
Forklift operation ought to focus on these issues ：.
Begin.
1. Prior to starting, observe the environments, and after validating that there are no barriers that prevent the safety and security of driving, honk the horn initially and then begin.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge have to be secure before beginning.
3. When the forklift starts with a lots, the motorist ought to first validate that the load is steady and reputable.
4. The start needs to be sluggish and consistent.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole should be slanted backward. .
2. Do not lift the fork too high when driving. When getting in and leaving the task site or while driving, be careful that there will certainly be no challenges overhead. When the load is taking a trip, the fork should not be increased expensive, which will certainly affect the stability of the forklift. .
3. After discharging, the fork needs to be reduced to the typical driving position before driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal ought to be issued initially. High-speed doglegs are forbidden. High-speed sharp turns will certainly trigger the car to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to turn off the flame and slide, and it is prohibited to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it must follow the traffic rules in the factory and must maintain a particular security distance from the automobile in front. .
7. When the forklift is running, the load must be in the lowest placement that does not prevent the driving, and the gantry must be correctly slanted back. The lots shall not be increased except when stacking or packing. .
8. The elevation of the lots need to not block the driver's sight. In unique circumstances, when the thing affects the forward vision, drive at a reduced speed when turning around.
9. It is prohibited to turn on the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory area is 5 km/h, and it should drive securely at a low rate when going into the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is forbidden for workers to stand on the fork to hold items and play a stabilizing duty. .
12. If problems are found, they will be fixed and reported in a timely way, and they will never run with illnesses or hide them.
filling and discharging.
1. When fork-loading products, the distance between both forks should be adjusted as required to make the lots of both forks balanced and not skewed, and one side of the item ought to be against the shelf. .
2. It is restricted to collaborate with a single fork or make use of a fork top or pull. In unique scenarios, safety indication should be established to remind bordering pedestrians. .
3. In the process of packing and dumping products, the forklift must be stopped with the brake. .
4. The rate of the automobile should be sluggish and steady. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and injure people. .
5. When making use of a fork to fork the goods, the fork ought to be as deep as feasible under the load, and it must be kept in mind that the fork suggestion need to not touch other products or things. The load must be stabilized with very little back tilt of the gantry to make sure that the tons does not move in reverse. The mast can be slanted onward slightly when the tons is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at high speed and collide with difficult things with the fork head. .
7. When the forklift is working, it is forbidden for people to loaf the fork, so as to stay clear of the collapse of the goods and harm people. .
8. Overloading is forbidden, and it is banned to use forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not allowed to utilize the brake inertia to slide, place, round or roll items. .
10. It is not permitted to make use of forks to select, turn pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should discharge the goods or lower the fork framework.
2. Pull the emergency brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the motorist does not leave the lorry's view and does not go beyond 1 min).
4. Eliminate the secret. .
Forklift Operation Electric Forklift Truck for Warehouse Precautions.
1. Before and after the forklift operation, the look needs to be examined, and gas, lubricating oil and cooling water ought to be added.
2. Examine the safety and security efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and reliable.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leak ought to likewise be inspected and the seals ought to be changed in time.
Forklift Safety Operation Specifications.
1. You should check prior to leaving the car;.
2. When you encounter someone before you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the Stand-on Electric Pallet Stacker cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be too sharp to stop the propensity of "free switching";.
6. Adding and down the slope should be sluggish and consistent, and no activating the slope is permitted.
7. Do not drive across the gradient. When the gradient is greater than 10%, the vehicle should be driven backwards when worsening;.
8. When the forklift workers lug the goods and move forward, if they come across large or heavy goods and most likely to the motorist's line of vision, they must take the turning around workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Solitary fork procedure is not allowed.
2. It is not allowed to lift the goods for long distance driving.
3. It is not enabled to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not enabled to utilize inertia pressure to pick up the goods.
6. It is not permitted to utilize braking pressure to expatriation round or easy-to-roll things.
7. It is not allowed to bring individuals to deal with the pallet or fork, and it is strictly prohibited to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not permitted under the following problems.
1. Contours, slim roadways, train crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the very same size as the obstacle ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844